MCGO

기기명 (Instrument) : 산업용 멀티미터 (Digital Multimeter)

제작회사 (Manufacturer) : Fluke (플루크)

형식 (Model) : 80 series V (83 V / 87 V / 88 V)

세부내용 (Description) : 

주요 기능

• 속도 조절이 가능한 모터 구동 및 기타 전기 노이즈가 발생하는 장비에서 정확한 전압 및 주파수 측정이 가능한 고유의 기능(87V)
• 열전쌍이 내장되어 있어 별도의 장비 없이도 편리하게 온도 판독이 가능(87V)
• 쉽게 설치할 수 있는 선택형 자석 걸이장치를 통해 다른 업무를 수행하는 동안 손을 자유롭게 사용할 수 있음
• 두 가지 레벨의 밝은 백라이트로 80 시리즈 V를 이전 모델보다 훨씬 더 쉽게 판독할 수 있도록 해주는 대형 디지털 디스플레이

제품 개요: Fluke 87 V 산업용 멀티미터

Fluke 80 시리즈 디지털 멀티미터 제품군은 제어실부터 공장까지 산업 기술자가 신뢰하는 디지털 멀티미터로서의 명성을 쌓아 왔습니다. 생산 현장에서 Fluke 80 시리즈는 문제를 신속하게 해결하는 데 필요한 정확도 및 고급 문제 해결 기능을 제공합니다.

로우 패스 필터 기능을 사용하여 조정 가능한 속도 모터 드라이브와 같은 전기적 노이즈 장비에서 전압 및 주파수를 정확하게 측정할 수 있습니다. 피크 캡처 기능을 사용하여 간헐적인 문제 및 과전압을 250µs만큼 빠른 속도로 검출할 수 있습니다.

또한 확신을 가지고 작업할 수 있습니다. 입력 경고 기능은 입력 잭의 잘못된 사용에 대한 경고음을 제공합니다. Fluke 80 시리즈 멀티미터는 CAT IV 600V/CAT III 1000V 환경에서 안전하게 사용할 수 있도록 독립적으로 테스트되었습니다. 8.000V를 초과하는 임펄스를 견딜 수 있어 서지 및 스파이크와 관련된 위험을 줄일 수 있습니다.

Fluke의 아이디어는 현장에서 바로 얻습니다. 사용자와 함께 원하는 작업을 수행하는 테스트 도구를 만들어 사용자에게 완전한 가치를 제공합니다. Fluke 80 시리즈 멀티미터는 미국에서 설계 및 제작되었습니다. 80 시리즈에는 제한적 평생 품질 보증이 적용됩니다. 따라서 사용자는 보다 효율적이고 빠르고 안전하게 작업할 수 있습니다.

Other useful features:

전기 안전
모든 입력은 ANSI/ISA S82.01 2nd edition과 EN61010-1 CAT IV 600V 및 CAT III, 1000V에 따라 보호됩니다. 8.000V를 초과하는 임펄스를 견딜 수 있어 서지 및 스파이크와 관련된 위험을 줄일 수 있습니다.

펄스 폭 변조 모터 드라이브 신호를 올바르게 측정
지금까지 조정 가능한 속도 드라이브를 정확하게 측정할 수 있는 멀티미터는 없었습니다. 하지만 새로운 Fluke 87V는 이러한 복잡한 신호를 처리하도록 특별히 설계되었습니다. 잠재적 생산성 덕분에 드라이브 시스템 문제 해결에서 추측을 배제할 수 있습니다. 측정이 항상 정확합니다.

제품 사양: Fluke 87 V 산업용 멀티미터

첨부 (Attach)

   파일내용 (The content of file) : 

     -.  Detailed Specification (데이터시트) :

     -. 사용설명서 :

     -. Calibration Manual :

     -. 시작하기 설명서 :

     -. Safety Information :

     -. Quick Reference Guide :

     -. Instrument Security Procedures :

     -. Manual Supplement :

     -. Calibration Manual Supplement :

     -. 시작하기 설명서 Supplement :

   사진 (Picture)  :

기기명 (Instrument) :  Digitizing Oscilloscope (디지타이징 오실로스코프)

제작회사 (Manufacturer) :  Tektronix (텍트로닉스)

형식 (Model) :  TDS784D

세부내용 (Description) : 

Features & Benefits
 -. 1 GHz Bandwidth
 -. Sample Rate to 4 GS/s
 -. 200,000 Maximum Waveform Capture Rate
 -. 4 Channels
 -. 1% Vertical Accuracy
 -. 8-Bit Vertical Resolution, Over 11 Bits with Averaging and Over 13 Bits with Hi-res
 -. 1 ns Peak Detect
 -. 1 mV/div to 10 V/div Sensitivity
 -. Channel Deskew
 -. Record Lengths to 8 M Points
 -. Floppy Disk Storage
 -. Iomega Zip and Zip Plus Drive Compatible
 -. Advanced Triggering
 -. 29 Automatic Measurements and Measurement Statistics
 -. FFT and Advanced Math
 -. Histograms
 -. Histogram Statistics
 -. Limit Test
 -. FastFrame™ Time Stamp
 -. Communication Signal Analysis Including Mask Testing and SONET/SDH and Fibre Channel Optical Reference Receivers
 -. Full GPIB Programmability
 -. 3 Year Warranty
 -. CE Marking

Applications
 -. Communication Compliance Testing
 -. Digital Design and Debug
 -. Jitter and Timing Analysis
 -. Fast Edge Characterization
 -. Video Design and Debug
 -. Disk Drive Measurements
 -. Power Measurements

Characteristics

TDS784D Electrical Characteristics

*1 In 50 Ω mode: 5 mV/div: 750 MHz, 2 mV/div: 600 MHz, 1 mV/div: 500 MHz. Reduce the upper bandwidth frequencies by 5 MHz for each degree C above 30 °C.

*2 Single-channel operating at full sample rate and maximum record length (Opt. 2M).

TDS784D Vertical System

TDS784D Timebase System

Acquisition Modes

DPO - Captures and displays complex waveforms, random events and subtle patterns in actual signal behavior. By acquiring up to 100 M points/sec, the TDS784D DPO is able to provide 3 dimensions of signal information, in real-time; amplitude, time, and the distribution of amplitude over time. The DPX™ Waveform Imaging Processor automatically selects record lengths between 500 and 500,000 points and sample rate up to 1 GS/s, based on horizontal time base setting, to optimize displayed sample density.

Peak Detect - High frequency and random glitch capture. Captures glitches of 1 ns using acquisition hardware at all real-time sampling rates.

Sample - Sample data only.

Envelope - Max/min values acquired over one or more acquisitions.

Average - Waveform data from 2 to 10,000 (selectable) is averaged.

Hi-res - Vertical resolution improvement and noise reduction on low-frequency signal (e.g. 12 Bits typical).

FastFrame™ Time Stamp - Acquisition memory size segmentable with trigger rate up to 80,000 per second from 50 to 5,000 points per frame (independent of the number of channels).

Single Sequence - Use RUN/STOP button to capture a single triggered acquisition at a time, which may be automatically saved to NVRAM with AutoSave.

Trigger System

Triggers - Main and delayed.

Main Trigger Modes - Auto, normal, single.

Delayed Trigger - Delayed by time, events or events and time.

Time Delay Range - 16 ns to 250 s.

Events Delay Range - 1 to 9,999,999 events.

External Rear Input - ≥1.5 kΩ; Max input voltage is ±20 V (DC + peak AC).

Trigger Types

EDGE (main and delayed) - Conventional level-driven trigger. Positive or negative slope on any channel or rear panel auxiliary input. Coupling selections: DC, AC, noise reject, HF reject, LF reject.

LOGIC (main) - PATTERN: Specifies a logical combination (AND, OR, NAND, NOR) of the four input channels (high, low, don't care). Trigger when pattern stays true or false for a specified time.

STATE: Any logical pattern of channels 1, 2, and 3 (AUX1 on 2-CH products) plus a clock edge on channel 4 (AUX2 on 2-CH products). Triggerable on rising or falling clock edge.

SETUP/HOLD: Trigger on violations of both setup time and hold time between clock and data which are on two input channels.

PULSE (main) - GLITCH: Trigger on or reject glitches of positive, negative, or either polarity. Minimum glitch width is 1.0 ns (typical) 2 ns (warranted) with 200 ps resolution.

RUNT: Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.

WIDTH: Trigger on width of positive or negative pulse either within or out of selectable time limits (1 ns to 1 s).

SLEW RATE: Trigger on pulse edge rates that are either faster or slower than a set rate. Edges can be rising, falling or either.

TIMEOUT: Trigger on an event which remains high, low, or either, for a specified time period, selectable from 1 ns to 1 s, with 200 ps resolution.

COMM (optional) - AMI: Trigger on standard communications signals (including DS1, DS1A, DS1C, DS2, DS3, E1, E2, E3, STS-1 or a custom bit rate). Select between "isolated ones" (positive or negative) and eye diagrams.

CMI: Trigger on standard communications signals (including STS-3, STM1E, DS4NA, E4 or a custom bit rate). Select between positive or negative one pulses, zero pulses and eye diagrams.

NRZ: Trigger on standard communications signals (including OC1/STM0, OC3/STM1, OC12/STM4, E5, FC133, FC266, FC531, FC1063, FDDI HALT, 143 Mb/s serial digital composite video, 270 Mb/s serial digital component video or a custom bit rate). Select between an eye diagram, rising or falling edges or any of eight 3-Bit serial patterns.

VIDEO (optional) - Trigger on a particular line of individual, odd/even or all fields. Trigger on a specific pixel of a line by using the video trigger with delay by events. Choose positive or negative horizontal sync polarity. 525/NTSC: Choose monochrome or color (studio-quality NTSC) sync formats. 625/PAL: Choose color or monochrome (studio-quality PAL) sync formats. HDTV: Choose from 1125/60, 1050/60, 1250/50 and 787.5/60 HDTV formats.

Measurement System

Automatic Waveform Measurements - Period, frequency, +width, -width, rise time, fall time, +duty cycle, -duty cycle, delay, phase, burst width, high, low, max. min, peak to peak, amplitude, +overshoot, -overshoot, mean, cycle mean, RMS, cycle RMS, area, cycle area, extinction ratio (ratio, dB, %) and mean optical power. Continuous update of up to four measurements on any combination of waveforms.

Measurement Statistics - Display minimum and maximum or mean and standard deviation on any displayed single-waveform measurements.

Thresholds - Settable in percentage or voltage.

Gating - Any region of the waveform may be isolated for measurement using vertical bars.

Snapshot - Performs all measurements on any one waveform showing results from one instant in time.

Cursor Measurements - Absolute, Delta: Volts, time, frequency and NTSC IRE and line number (with video trigger option).

Cursor Types - Horizontal bars (volts), vertical bars (time); operated independently or in tracking mode.

Waveform Processing

Waveform Functions - Sin(x)/x or linear interpolation, average, envelope.

Advanced Waveform Functions - FFT, integration, differentiation.

Arithmetic Operators - Add, subtract, multiply, divide, invert.

Autoset - Single-button, automatic setup on selected input signal for vertical, horizontal and trigger systems. Also automatically normalizes signals to standard masks when used with the mask testing option.

Waveform Limit Testing - Compares incoming or math waveform to a reference waveform's upper and lower limits.

Waveform Histograms - Both vertical and horizontal histograms, with periodically updated measurements, allow statistical distributions to be analyzed over any region of the signal. For histograms on DPO acquisitions, both live and stored, the specified region can be repositioned and will update to reflect the underlying 3 dimensional data base, in both YT and XY modes (32 Bits in shallow mode, 64 Bits in deep mode).

Mask Testing (optional) - In addition to the standard communication masks in the instrument, the masks can be edited on the screen. Together with automatic waveform scaling, the mask tests give rapid verification of a digital bit stream's conformance to pulse templates and eye pattern masks. For optical conformance testing, the internal Fibre Channel and SONET/SDH optical reference receiver filters provide convenient test setup which is compliant to industry standards.

Zoom Characteristics - The zoom feature allows waveforms to be expanded or compressed in both vertical and horizontal axes. Allows precise comparison and study of fine waveform detail without affecting ongoing acquisitions. When used with Hi-res or Average acquisition modes, Zoom provides an effective vertical dynamic range or 1,000 divisions or 100 screens. Zoom features not available on DPO operations.

Dual Window Zoom - Dual graticules simultaneously show selected and zoomed waveforms. Up to two zoom boxes show areas on the selected trace that are being magnified, and the two magnified areas can be overlapped for quick comparison. Color of zoomed trace matches selected trace.

Display Characteristics

Waveform Style - Dots, vectors, variable persistence from 32 ms to 10 s, infinite persistence and intensified samples.

Color - Standard palettes and user-definable color for waveforms, text, graticules and cursors. Measurement text and cursor colors matched to waveform. Waveform collision areas highlighted with different color. Statistical waveform distribution shown with color grading through variable persistence.

Color Grading - With variable persistence selected, historical timing information is represented by temperature or spectral color scheme providing "Z-axis" information about rapidly-changing waveforms.

Graticules - Full, grid, cross-hair, frame, NTSC and PAL (with video trigger option).

Format - YT and XY (and XYZ and dual XY in DPO operation).

Type - 7 in. diagonal, NuColor™ liquid crystal full color shutter display, 256 color levels.

Resolution - 640 horizontal by 480 vertical displayed pixels (VGA).

Computer Interface

GPIB (IEEE-488.2) Programmability - Full talk/listen modes. Control of all modes, settings, and measurements.

Hardcopy

Printer - Phaser 740N/740P, HP Thinkjet, Deskjet, Laserjet, Epson, Interleaf, PostScript, TIFF, PCX, BMP, DPU411/412, RLE.

Plotter - HPGL.

Data - MathCad, spreadsheet formats.

Interface - GPIB standard.

Hardcopy Interface - Centronics and RS-232 (talk only).

Storage

Non-volatile Waveform Storage - 4 full 50 K records (Opt. 1M or 2M: 4 full 130 K records, 2 full 250 K records or 1 compressed 500 K record).

Non-volatile Storage for Setups - 10 front panel setups.

Floppy Disk Drive - Store reference waveforms, setups and image files on 3.5 in. 1.44 MB or 720 K MS DOS-format floppy disk.

Iomega Zip and Zip Plus Drive Compatible - Compatible for waveform and front panel setup file transfer to Iomega Zip and Zip Plus Drives.

Power Requirements

Line Voltage Range - 100 to 240 VRMS, ±10%.

Line Frequency - 45 to 440 Hz.

Power Consumption - 350 W max.

Environmental and Safety

Temperature - Operating: +4 °C to +50 °C (floppy not used), +10 °C to +50 °C (floppy in use).

Nonoperating: -22 °C to +60 °C.

Humidity - Operating: To 80% RH at ≤ 32 °C. Derates to 30% RH at +45 °C.

Nonoperating: To 90% RH at ≤ 40 °C. Derates to 30% RH at +60 °C.

Altitude - Operating: 15,000 ft. (hard disk not used), 10,000 ft. (hard disk in use).

Nonoperating: 40,000 ft.

Electromagnetic Compatibility - 89/336/EEC.

Safety - UL3111-1, CSA1010.1, EN61010-1, IEC61010-1.

Physical Characteristics

첨부 (Attach)

   파일내용 (The content of file) : 

     -. Data Sheet (데이터시트; TDS700D series) :

     -. User Manual (사용설명서; TDS500D, TDS600B, TDS700D series) :

     -. Service Manual (서비스 매뉴얼; TDS500D, TDS600B, TDS700D series & TDS714L) :

     -. Technical Reference (TDS500D, TDS600B, TDS700D series & TDS714L) :

     -. Reference (TDS500D TDS600B TDS700D series) :

   사진 (Picture)  :

기기명 (Instrument) :  Decade Resistance Box (계단식 저항 박스)

제작회사 (Manufacturer) :  POINTECH

형식 (Model) :  PTI-1000 / PTI-1003

세부내용 (Description) : 

상품상세정보

Specification

첨부 (Attach)

   파일내용 (The content of file) : 

   사진 (Picture)  :