MCGO

기기명 (Instrument) : 식품용 적외선 온도계

제작회사 (Manufacturer) : TESTO (테스토)

형식 (Model) : 826-T4

세부내용 (Description) : 

-. 하나의 기기로 적외선 및 침투 측정 가능
-. 6:1의 초점비 및 1포인트 레이저 기능
-. 최소/최대값 표시 및 한계값 초과시 알림 기능
-. 방수 가능한 TopSafe 보호케이스

침투 측정과 적외선 측정이 모두 가능한 식품용 적외선 온도계 testo 826-T4.

#. 제품 설명

제품의 입출고 시 온도 점검은 필수적입니다. 특히 식품 분야에서 더욱 그렇습니다. 식품용 적외선 온도계 testo 826-T4는 HACCP와 EN 13485 인증을 받아 믿고 사용할 수 있는 온도계입니다.
 
#. 식품용 적외선 온도계 testo 826-T4 의 장점

식품 관리를 위해 입고되는 물품을 빠르고 정확하게 측정해야 하나요? HACCP 의 인증을 받은 식품용 적외선 온도계 testo 826-T4로 여러분이 원하는 결과를 얻으세요.
 
-. 빠르고 정확한 측정 결과: 식품용 적외선 온도계 testo 826-T4는 두 가지 측정을 수행합니다. 적외선 측정은 제품의 표면 온도를 아주 빠르게 측정해 줄 뿐 아니라 0.1℃의 뛰어난 분해능을 자랑합니다. 또한 영구적으로 장착된 침투용 프로브는 규정된 한계값에 도달하거나 한계값을 초과하면 여러분에게 정확한 정보를 제공할 것입니다. 특히 침투용 프로브는 요거트, 치즈, 돼지고기 등 다양한 식품의 중심 온도를 정확하게 측정할 수 있도록 도와줍니다
-. 한 눈에 확인할 수 있는 온도 한계값: 여러분이 설정한 한계값 위반 시 시각과 청각, 두 가지 방식으로 알려줍니다. 이것은 여러분이 계속해서 온도 측정 값을 확인하고 있지 않아도 된다는 것을 의미합니다
-. 최소/최대값 디스플레이 및 홀드 기능: 여러분이 제품의 온도를 안전하고, 믿을 수 있게 모니터링 해야 한다면 최소/최대값 표시 기능을 이용하세요. 홀드 버튼을 이용해 최종 측정값을 디스플레이에 고정하는 기능도 지원합니다
-. 초점비 6:1 및 1포인트 레이저 지원: 1포인트 레이저는 적외선 측정 시 측정 대상의 중심부를 표시해줍니다. 또한 6:1의 초점비는 가까운 거리부터 멀리 떨어진 거리까지 자유로운 측정이 가능하도록 도와줍니다
-. HACCP 인증 완료: 식품용 적외선 온도계 testo 826-T4는 HACCP와 EN 13485의 인증을 받아 믿고 사용할 수 있습니다. 이것은 식품 분야에 아주 적합하다는 것을 의미합니다
-. 실용적인 액세서리 포함: 식품용 적외선 온도계 testo 826-T4는 튼튼하고 방수기능이 있는 TopSafe 보호케이스(IP67)와 함께 제공됩니다. TopSafe 보호케이스는 흐르는 물에 씻어도 문제가 되지 않습니다. 벽걸이/ 벨트 홀더와 침투용 프로브 보호캡도 함께 제공됩니다
 
#. 기술데이터

첨부 (Attach)

   파일내용 (The content of file) : 

   -. Data Sheet (데이터시트) :

   -. Instruction Manual (사용설명서_간단사용설명서) :

   사진 (Picture)  :

기기명 (Instrument) : 적외선 측정과 침투형 측정이 모두 가능한 폴더형 방수 온도계

제작회사 (Manufacturer) : TESTO (테스토)

형식 (Model) : 104-IR

세부내용 (Description) : 

-. 식품의 표면과 심부 온도 모두 측정 가능
-. 방수 적외선 탐침 온도계
-. 지속가능하고, 실용적인 사용 가능- 방수기능(IP65), 어디든 편하게 들고 다닐 수 있는 접이식
-. HACCP와 EN 13485에 의거하여 제작

식품 입고부터 보관까지 식품 분야에서 다양하게 활용할 수 있는 방수 적외선 중심 온도계 testo 104-IR

#. 제품 설명

방수 적외선 중심 온도계 testo 104-IR은 온도와 식품 안전을 점검하는 데 이상적입니다. 침투형 프로브의 경우, 접어서 주머니 안에 넣어 보관할 수 있기 때문에 보관이 간편합니다. testo 104-IR은 제품 생산에서부터 입고되는 현장이나 운송의 순간, 판매에 이르기까지 제품 점검이 필요로 하는 순간에 언제든지 여러분의 곁에 있을 것입니다.
 
#. 적외선 측정과 침투형 측정이 모두 가능한 폴더형 방수 온도계

방수 적외선 중심 온도계 testo 104-IR은 높은 정확도의 2포인트 레이저를 통해 측정 범위를 확인할 수 있습니다. 또한 10:1의 높은 초점비로 빠르고 정확하게 표면 온도를 측정할 수 있습니다. 그렇기 때문에 testo 104-IR은 제품 입고 시 검수용으로, 식료품 외에도 모든 화물의 정밀 검사용으로 다양하게 활용될 수 있습니다.
접이식 폴더형 온도계는 육류와 소시지 같은 식품의 심부 온도를 측정하는 데 적합하도록 설계되었습니다. 침투형 프로브는 적외선 방식의 한계가 있을 때 주로 사용됩니다. 이 프로프는 접어서 보관할 수 있기 때문에 제품 파손을 방지할 수 있습니다.
 
#. 빠르고 쉬운 사용. 현장에서 직접 사용하고, 판단하세요

침투형 프로브는 프로브가 펼쳐지는 순간 측정이 시작됩니다. 적외선 센서를 이용해 측정을 하려면, 버튼만 누르시면 됩니다. 측정된 값은 크고, 읽기 쉬운 디스플레이를 통해 확인할 수 있습니다.  버튼은 이해하기 쉽도록 간편하게 되어 있어, 사용법을 따로 교육 받을 필요도 없습니다. testo 104-IR이 방수 기능(IP65)을 갖추고 있다는 보다 안전하게 제품을 사용하실 수 있습니다.
 
#. 방수 적외선 중심 온도계 testo 104-IR의 적용분야

식품이 배송 중이거나 창고에 보관 중인 이러한 상황은 더 이상 중요하지 않습니다. 방수 적외선 중심 온도계 testo 104-IR은 언제 어디서나 사용할 수 있기 때문입니다. testo 104-IR은 콜드체인의 어떤 과정이라도 규정된 온도를 지키기 위해 사용되는 이상적인 온도계입니다. testo의 다른 식품용 온도계처럼 testo 104-IR도 HACCP과 EN 13485에 의거하여 제작되었습니다.

#. 기술데이터

첨부 (Attach)

   파일내용 (The content of file) : 

   -. 카달로그 (Catalog) :

   -. Instruction Manual (사용 설명서) :

   사진 (Picture)  :

기기명 (Instrument) : 미니 적외선 온도계

제작회사 (Manufacturer) : TESTO (테스토)

형식 (Model) : 805

세부내용 (Description) : 

-. 비접촉방식의 적외선 측정기
-. TopSafe 보호케이스(옵션) 장착 시 보호등급 IP65로 방수 및 방진 기능
-. 장시간 측정에 적합한 스캔 모드 지원
-. 길이 8cm의 작은 크기로 휴대 용이

작고 편리한 비접촉식 적외선 온도계

#. 제품 설명

8cm의 미니 적외선 온도계 testo 805는 자켓이나 바지 주머니에 넣을 수 있어서 신속하게 측정이 가능합니다. 식품 분야와 설비기술 분야에서 최적의 조건으로 신속하게 측정할 수 있습니다. 미니 적외선 온도계 testo 805은 TopSafe 보호케이스(옵션) 장착 시 보호등급 IP65에 따라 충격과 먼지로부터 보호할 수 있습니다. 장기 측정을 위한 스캔 모드와 홀드 기능 추가로 최소/최대값을 안정적으로 표시합니다.  

#. 기술데이터

첨부 (Attach)

   파일내용 (The content of file) : 

   -. Data Sheet (데이터시트) :

   -. Instruction Manual (사용설명서) :

   사진 (Picture)  :

기기명 (Instrument) : 산업용 적외선 온도계

제작회사 (Manufacturer) : TESTO (테스토)

형식 (Model) : 835-H1

세부내용 (Description) : 

-. 하나의 장비로 온도, 습도, 이슬점(노점) 측정 가능
-. 표면 습도 측정 가능
-. 쉽고 간편한 사용 – 사용이 간편한 메뉴 가이드, 200개의 측정값 저장 가능, 소프트웨어를 통한 데이터 관리 가능
-. 먼 거리에서 측정도 문제없는 50:1의 초점비와 4포인트 레이저

온도 뿐 아니라 습도까지 측정할 수 있는 통합 센서가 내장된 산업용 적외선 온도계 testo 835-H1.

#. 제품 설명

벽의 온도와 습도 측정을 수행하고, VAC 시스템을 모니터링하고 점검하려면, 산업용 적외선 온도계 testo 835-H1이 필요합니다. testo 835-H1은 산업현장 어디서나 유용하게 사용할 수 있는 만능 장비입니다.
 
 
#. 산업용 적외선 온도계 testo 835-H1의 기능

-. 표면 온도와 상대 습도, 이슬점(노점), 표면 습도 측정 가능
-. 건물 내 곰팡이 사전 감지에 도움
-. 작고 닿기 어려운 물체의 측정을 정확하고 안전하게 수행
 

#. 산업용 적외선 testo 835-H1에 적용된 최첨단 기술

-. 4포인트 레이저- 정확한 측정 구역을 보여줌으로써 잘못 측정되는 것을 효과적으로 방지할 수 있습니다
-. 먼 거리에서도 완벽한 표면 온도 측정이 가능한 초점비 50:1을 지원합니다
-. 다양한 표면을 측정할 수 있는 조정 가능한 방사율 정보가 내장되어 있습니다
-. 외부 온도 센서 연결 가능-온도 프로브 연결을 통해 아주 작은 수치의 방사율도 조정을 통해 파악할 수 있습니다
-. 아이콘과 조이스틱을 이용한 따라하기 쉬운 메뉴 가이드와 간편한 사용법
-. 최대 200개의 측정값 저장 및 측정 포인트 생성 가능최
-. 개별 한계값 알림 설정 가능, 시각 및 청각 알림 기능
-. 최소/최대값 표시
-. 백라이트 디스플레이

#. 기술데이터

첨부 (Attach)

   파일내용 (The content of file) : 

   -. Data Sheet (데이터 시트) :

   -. Instruction Manual (사용 설명서) :

   사진 (Picture)  :

기기명 (Instrument) : Smart Probes heating set - with smartphone operation

제작회사 (Manufacturer) : TESTO (테스토)

형식 (Model) : 115i / 510i / 805i

세부내용 (Description) : 

-. Measurement of gas flow and static pressure
-. Non-contact temperature measurement on underfloor heating systems and radiators
-. Measurement menu for pressure drop test, including alerts via testo Smart Probes App
-. Rapid image documentation with IR temperature readings and measuring spot marking

With the Testo Smart Probes Heating set, you can measure and check all heating system temperatures and pressures in conjunction with your smartphone. The robust testo Smart Case enables the measuring instruments to be conveniently transported and ensures that they are always to hand when needed.

#. 제품 설명

The compact testo Smart Probes Heating set with the testo 115i clamp thermometer, the testo 510i differential pressure measuring instrument and the testo 805i infrared thermometer is ideal for key measuring tasks carried out by heating engineers.

The advantages of the heating set

In conjunction with your smartphone or tablet, the heating set can be used to measure and check all heating system temperatures and pressures. The handy testo Smart Case provides optimum protection for the measuring instruments and ensures that they are always to hand when they are needed.

Advantages and applications of the individual measuring instruments:

testo 115i: clamp thermometer with smartphone operation
-. Measuring the flow and return temperature of heating systems
-. Easy to use at measuring points that are far apart
-. Rapid detection of temperature changes via graphical progress display

testo 510i: differential pressure measuring instrument with smartphone operation
-. Measurement of gas flow and static pressure
-. Measurement menu for pressure drop test including alerts
-. Simple configuration and determination of volume flow with Pitot tube
-. Magnetic holder for easy attachment

testo 805i: infrared thermometer with smartphone operation
-. Non-contact infrared measurement of surface temperature
-. Measuring spot marking via highly visible 8-point laser circle
-. Easy selection of emission level via stored materials list
-. Image documentation with readings and measuring spot marking
 
Practical App with special functions for measurement data analysis on your smartphone or tablet

Measurement data is transmitted wirelessly from the relevant measuring instrument to the testo Smart Probes App and can be viewed conveniently on mobile terminal devices – either as a chart or in table form. Menus for specific applications are also already stored in the App. For example, for pressure drop tests including alert function and for non-contact temperature measurement via infrared with rapid image documentation including reading and measuring spot marking. The measurement data log can be emailed directly as a PDF or Excel file. This saves you time, allowing you to further increase your efficiency.

System requirements:
-. iOS 8.3 or later
-. Android 4.3 or later
-. Bluetooth 4.0

#. 기술데이터

첨부 (Attach)

   파일내용 (The content of file) : 

   - FAQ :

   - Startup Instruction :

   사진 (Picture)  :

기기명 (Instrument) : 산업용 적외선 온도계

제작회사 (Manufacturer) : TESTO (테스토)

형식 (Model) : 835-T2

세부내용 (Description) : 

-. 온도 측정 범위 최대 1500℃까지 확장 가능
-. 안전한 거리에서 움직이는 물체를 정확하게 측정할 수 있는 적외선 방식의 온도계
-. 측정값 최대 200개 저장 가능 – 측정값 분석 용이(소프트웨어 무료 다운로드 가능)
-. 원거리에서 정확한 측정이 가능한 4 포인트 레이저와 초점비 50:1

움직이는 물체를 안전하고 믿을 수 있게 측정할 수 있으며 최대 1500℃의 고온을 측정할 수 있는 산업용 적외선 온도계.

#. 제품 설명

산업용 적외선 온도계 testo 835-T2는 유리, 세라믹, 메탈 산업 현장에서 유용하게 사용할 수 있습니다. 적외선 온도계는 높은 온도 범위 대역의 다양한 측정을 위한 이상적인 측정 기기입니다. testo 835-T2는 안전한 거리에서 최대 1500℃까지 측정할 수 있습니다. 측정 대상이 작고, 다가가기 어렵다고 해도 문제가 되지 않습니다. 심지어 움직이고 있으며, 아주 뜨거운 대상이라도 측정할 수 있습니다. 첨단기술이 집약된 내부 설계로 모든 상황에서 빠르고 안전한 측정이 가능합니다.

-. 4포인트 레이저 방식으로 측정 구역을 확실하게 지정할 수 있으며 부정확한 측정을 사전에 막을 수 있습니다
-. 50:1의 초점비로 먼 거리에서 측정을 수행할 수 있으며 최상의 측정 결과를 얻을 수 있습니다 (측정 거리 5 m  =  측정 지점 10 cm)
-. 방사율값이 내장되어 있어 측정대상의 표면의 방사율을 올바르게 설정할 수 있습니다
-. 백라이트 디스플레이는 조명이 필요한 환경에서 아무 문제없이 측정이 가능하도록 도와줍니다

testo 835-T2는 접촉식 온도 측정도 수행할 수 있습니다. 접촉식 온도 프로브는 넓은 선택 폭을 자랑하기 때문에 측정 환경에 맞는 프로브를 선택해 사용할 수 있습니다. 온도 센서는 특정 표면 온도의 방사율을 자동으로 측정할 수 있습니다. 또한 접촉식 프로브를 이용해 특정 표면의 방사율을 확인할 수도 있습니다. 방사율 값을 확인함으로써 차후의 적외선 측정을 더욱 쉽게 수행할 수 있습니다.
또한 testo 835-T2는 삼각대부터 견고한 운반 케이스까지 넓은 액세서리 선택 폭을 자랑합니다. 사용자의 필요에 맞춘 testo 835-T2를 구성할 수 있습니다.
 
#. 간단한 사용법과 측정값 분석

산업용 적외선 온도계 testo 835-T2는 사용법이 간단해 누구나 쉽게 따라할 수 있습니다. 따로 설명할 필요 없는 아이콘과 사용자 친화적인 조이스틱만으로 간편하게 조작할 수 있습니다. testo 835-T2는 다양한 측정 장소를 지정할 수 있으며 최대 200개의 측정값을 저장할 수 있습니다. 동시에 최소/최대값을 표시해주며, 한계값을 설정할 수 있고, 한계값 초과시 알림 기능(시각 및 청각 알림)이 있습니다. 이러한 기능은 여러분의 작업을 더욱 효율적이고 쉽게 만들어줄 것입니다. 또한 무료로 다운로드할 수 있는 “EasyClimate” 소프트웨어를 이용해 빠르고 편리한 측정값 분석을 수행할 수 있습니다.

#. 기술데이터

첨부 (Attach)

   파일내용 (The content of file) : 

   -. Data Sheet (데이터시트) :

   -. Instruction Manual (사용설명서) :

   사진 (Picture)  :

기기명 (Instrument) : 산업용 적외선 온도계 (Infrared Thermometer)

제작회사 (Manufacturer) : TESTO (테스토)

형식 (Model) : 835-T1

세부내용 (Description) : 

-. 측정영역을 정확하게 표시해주는 4포인트 레이저 마킹
-. 완벽한 측정 신뢰도를 제공하는 방사율 측정 기능 내장
-. 아이콘과 조이스틱을 이용한 편리한 메뉴 안내
-. 측정값 및 측정장소 저장 메모리

50:1의 초점비로 먼 거리에서도 정확한 산업용 적외선 온도계

#. 제품 설명

산업용 적외선 온도계 testo 835-T1은 산업현장에서 빠르고 정확한 온도 점검이 가능합니다. 벽 표면의 온도 모니터링이나, 냉난방 시스템의 문제점 확인, 생산되는 제품의 품질 관리 등을 목적으로 활용할 수 있습니다.
 
-. 4포인트 레이저로 정확한 측정 지점 확인 가능
-. 50:1의 초점비로 원거리에서도 정확한 측정 가능 (측정 거리 5 m  =  측정 지점 10 cm)
-. 외부 온도 프로브 연결을 통한 정확한 방사율 적용 가능
-. 어두운 환경에서 측정이 용이한 디스플레이 백라이트 기능 지원
 
적외선 온도계 testo 835-T1은 방사율 조정을 위해 외장 프로브를 연결할 수 있습니다. 다양한 온도 프로브 중 선택해 사용할 수 있으며, 이를 통해 측정 대상의 정확한 방사율 값을 확인할 수 있습니다. 이는 곧 정확한 측정을 돕습니다.
 
#. 전용 PC 소프트웨어를 이용한 측정 데이터 관리 가능

산업용 적외선 온도계 testo 835는 측정값을 최대 200개까지 저장할 수 있습니다. 또한 무료로 다운로드 가능한 EasyClimate 소프트웨어를 이용하면 측정값 분석 및 관리가 가능합니다.

#. 기술데이터

첨부 (Attach)

   파일내용 (The content of file) : 

   -. Data Sheet (데이터시트) :

   -. Instruction Manual (사용설명서) :

   사진 (Picture)  :

기기명 (Instrument) :  Digitizing Oscilloscope (디지타이징 오실로스코프)

제작회사 (Manufacturer) :  Tektronix (텍트로닉스)

형식 (Model) :  TDS784D

세부내용 (Description) : 

Features & Benefits
 -. 1 GHz Bandwidth
 -. Sample Rate to 4 GS/s
 -. 200,000 Maximum Waveform Capture Rate
 -. 4 Channels
 -. 1% Vertical Accuracy
 -. 8-Bit Vertical Resolution, Over 11 Bits with Averaging and Over 13 Bits with Hi-res
 -. 1 ns Peak Detect
 -. 1 mV/div to 10 V/div Sensitivity
 -. Channel Deskew
 -. Record Lengths to 8 M Points
 -. Floppy Disk Storage
 -. Iomega Zip and Zip Plus Drive Compatible
 -. Advanced Triggering
 -. 29 Automatic Measurements and Measurement Statistics
 -. FFT and Advanced Math
 -. Histograms
 -. Histogram Statistics
 -. Limit Test
 -. FastFrame™ Time Stamp
 -. Communication Signal Analysis Including Mask Testing and SONET/SDH and Fibre Channel Optical Reference Receivers
 -. Full GPIB Programmability
 -. 3 Year Warranty
 -. CE Marking

Applications
 -. Communication Compliance Testing
 -. Digital Design and Debug
 -. Jitter and Timing Analysis
 -. Fast Edge Characterization
 -. Video Design and Debug
 -. Disk Drive Measurements
 -. Power Measurements

Characteristics

TDS784D Electrical Characteristics

*1 In 50 Ω mode: 5 mV/div: 750 MHz, 2 mV/div: 600 MHz, 1 mV/div: 500 MHz. Reduce the upper bandwidth frequencies by 5 MHz for each degree C above 30 °C.

*2 Single-channel operating at full sample rate and maximum record length (Opt. 2M).

TDS784D Vertical System

TDS784D Timebase System

Acquisition Modes

DPO - Captures and displays complex waveforms, random events and subtle patterns in actual signal behavior. By acquiring up to 100 M points/sec, the TDS784D DPO is able to provide 3 dimensions of signal information, in real-time; amplitude, time, and the distribution of amplitude over time. The DPX™ Waveform Imaging Processor automatically selects record lengths between 500 and 500,000 points and sample rate up to 1 GS/s, based on horizontal time base setting, to optimize displayed sample density.

Peak Detect - High frequency and random glitch capture. Captures glitches of 1 ns using acquisition hardware at all real-time sampling rates.

Sample - Sample data only.

Envelope - Max/min values acquired over one or more acquisitions.

Average - Waveform data from 2 to 10,000 (selectable) is averaged.

Hi-res - Vertical resolution improvement and noise reduction on low-frequency signal (e.g. 12 Bits typical).

FastFrame™ Time Stamp - Acquisition memory size segmentable with trigger rate up to 80,000 per second from 50 to 5,000 points per frame (independent of the number of channels).

Single Sequence - Use RUN/STOP button to capture a single triggered acquisition at a time, which may be automatically saved to NVRAM with AutoSave.

Trigger System

Triggers - Main and delayed.

Main Trigger Modes - Auto, normal, single.

Delayed Trigger - Delayed by time, events or events and time.

Time Delay Range - 16 ns to 250 s.

Events Delay Range - 1 to 9,999,999 events.

External Rear Input - ≥1.5 kΩ; Max input voltage is ±20 V (DC + peak AC).

Trigger Types

EDGE (main and delayed) - Conventional level-driven trigger. Positive or negative slope on any channel or rear panel auxiliary input. Coupling selections: DC, AC, noise reject, HF reject, LF reject.

LOGIC (main) - PATTERN: Specifies a logical combination (AND, OR, NAND, NOR) of the four input channels (high, low, don't care). Trigger when pattern stays true or false for a specified time.

STATE: Any logical pattern of channels 1, 2, and 3 (AUX1 on 2-CH products) plus a clock edge on channel 4 (AUX2 on 2-CH products). Triggerable on rising or falling clock edge.

SETUP/HOLD: Trigger on violations of both setup time and hold time between clock and data which are on two input channels.

PULSE (main) - GLITCH: Trigger on or reject glitches of positive, negative, or either polarity. Minimum glitch width is 1.0 ns (typical) 2 ns (warranted) with 200 ps resolution.

RUNT: Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.

WIDTH: Trigger on width of positive or negative pulse either within or out of selectable time limits (1 ns to 1 s).

SLEW RATE: Trigger on pulse edge rates that are either faster or slower than a set rate. Edges can be rising, falling or either.

TIMEOUT: Trigger on an event which remains high, low, or either, for a specified time period, selectable from 1 ns to 1 s, with 200 ps resolution.

COMM (optional) - AMI: Trigger on standard communications signals (including DS1, DS1A, DS1C, DS2, DS3, E1, E2, E3, STS-1 or a custom bit rate). Select between "isolated ones" (positive or negative) and eye diagrams.

CMI: Trigger on standard communications signals (including STS-3, STM1E, DS4NA, E4 or a custom bit rate). Select between positive or negative one pulses, zero pulses and eye diagrams.

NRZ: Trigger on standard communications signals (including OC1/STM0, OC3/STM1, OC12/STM4, E5, FC133, FC266, FC531, FC1063, FDDI HALT, 143 Mb/s serial digital composite video, 270 Mb/s serial digital component video or a custom bit rate). Select between an eye diagram, rising or falling edges or any of eight 3-Bit serial patterns.

VIDEO (optional) - Trigger on a particular line of individual, odd/even or all fields. Trigger on a specific pixel of a line by using the video trigger with delay by events. Choose positive or negative horizontal sync polarity. 525/NTSC: Choose monochrome or color (studio-quality NTSC) sync formats. 625/PAL: Choose color or monochrome (studio-quality PAL) sync formats. HDTV: Choose from 1125/60, 1050/60, 1250/50 and 787.5/60 HDTV formats.

Measurement System

Automatic Waveform Measurements - Period, frequency, +width, -width, rise time, fall time, +duty cycle, -duty cycle, delay, phase, burst width, high, low, max. min, peak to peak, amplitude, +overshoot, -overshoot, mean, cycle mean, RMS, cycle RMS, area, cycle area, extinction ratio (ratio, dB, %) and mean optical power. Continuous update of up to four measurements on any combination of waveforms.

Measurement Statistics - Display minimum and maximum or mean and standard deviation on any displayed single-waveform measurements.

Thresholds - Settable in percentage or voltage.

Gating - Any region of the waveform may be isolated for measurement using vertical bars.

Snapshot - Performs all measurements on any one waveform showing results from one instant in time.

Cursor Measurements - Absolute, Delta: Volts, time, frequency and NTSC IRE and line number (with video trigger option).

Cursor Types - Horizontal bars (volts), vertical bars (time); operated independently or in tracking mode.

Waveform Processing

Waveform Functions - Sin(x)/x or linear interpolation, average, envelope.

Advanced Waveform Functions - FFT, integration, differentiation.

Arithmetic Operators - Add, subtract, multiply, divide, invert.

Autoset - Single-button, automatic setup on selected input signal for vertical, horizontal and trigger systems. Also automatically normalizes signals to standard masks when used with the mask testing option.

Waveform Limit Testing - Compares incoming or math waveform to a reference waveform's upper and lower limits.

Waveform Histograms - Both vertical and horizontal histograms, with periodically updated measurements, allow statistical distributions to be analyzed over any region of the signal. For histograms on DPO acquisitions, both live and stored, the specified region can be repositioned and will update to reflect the underlying 3 dimensional data base, in both YT and XY modes (32 Bits in shallow mode, 64 Bits in deep mode).

Mask Testing (optional) - In addition to the standard communication masks in the instrument, the masks can be edited on the screen. Together with automatic waveform scaling, the mask tests give rapid verification of a digital bit stream's conformance to pulse templates and eye pattern masks. For optical conformance testing, the internal Fibre Channel and SONET/SDH optical reference receiver filters provide convenient test setup which is compliant to industry standards.

Zoom Characteristics - The zoom feature allows waveforms to be expanded or compressed in both vertical and horizontal axes. Allows precise comparison and study of fine waveform detail without affecting ongoing acquisitions. When used with Hi-res or Average acquisition modes, Zoom provides an effective vertical dynamic range or 1,000 divisions or 100 screens. Zoom features not available on DPO operations.

Dual Window Zoom - Dual graticules simultaneously show selected and zoomed waveforms. Up to two zoom boxes show areas on the selected trace that are being magnified, and the two magnified areas can be overlapped for quick comparison. Color of zoomed trace matches selected trace.

Display Characteristics

Waveform Style - Dots, vectors, variable persistence from 32 ms to 10 s, infinite persistence and intensified samples.

Color - Standard palettes and user-definable color for waveforms, text, graticules and cursors. Measurement text and cursor colors matched to waveform. Waveform collision areas highlighted with different color. Statistical waveform distribution shown with color grading through variable persistence.

Color Grading - With variable persistence selected, historical timing information is represented by temperature or spectral color scheme providing "Z-axis" information about rapidly-changing waveforms.

Graticules - Full, grid, cross-hair, frame, NTSC and PAL (with video trigger option).

Format - YT and XY (and XYZ and dual XY in DPO operation).

Type - 7 in. diagonal, NuColor™ liquid crystal full color shutter display, 256 color levels.

Resolution - 640 horizontal by 480 vertical displayed pixels (VGA).

Computer Interface

GPIB (IEEE-488.2) Programmability - Full talk/listen modes. Control of all modes, settings, and measurements.

Hardcopy

Printer - Phaser 740N/740P, HP Thinkjet, Deskjet, Laserjet, Epson, Interleaf, PostScript, TIFF, PCX, BMP, DPU411/412, RLE.

Plotter - HPGL.

Data - MathCad, spreadsheet formats.

Interface - GPIB standard.

Hardcopy Interface - Centronics and RS-232 (talk only).

Storage

Non-volatile Waveform Storage - 4 full 50 K records (Opt. 1M or 2M: 4 full 130 K records, 2 full 250 K records or 1 compressed 500 K record).

Non-volatile Storage for Setups - 10 front panel setups.

Floppy Disk Drive - Store reference waveforms, setups and image files on 3.5 in. 1.44 MB or 720 K MS DOS-format floppy disk.

Iomega Zip and Zip Plus Drive Compatible - Compatible for waveform and front panel setup file transfer to Iomega Zip and Zip Plus Drives.

Power Requirements

Line Voltage Range - 100 to 240 VRMS, ±10%.

Line Frequency - 45 to 440 Hz.

Power Consumption - 350 W max.

Environmental and Safety

Temperature - Operating: +4 °C to +50 °C (floppy not used), +10 °C to +50 °C (floppy in use).

Nonoperating: -22 °C to +60 °C.

Humidity - Operating: To 80% RH at ≤ 32 °C. Derates to 30% RH at +45 °C.

Nonoperating: To 90% RH at ≤ 40 °C. Derates to 30% RH at +60 °C.

Altitude - Operating: 15,000 ft. (hard disk not used), 10,000 ft. (hard disk in use).

Nonoperating: 40,000 ft.

Electromagnetic Compatibility - 89/336/EEC.

Safety - UL3111-1, CSA1010.1, EN61010-1, IEC61010-1.

Physical Characteristics

첨부 (Attach)

   파일내용 (The content of file) : 

     -. Data Sheet (데이터시트; TDS700D series) :

     -. User Manual (사용설명서; TDS500D, TDS600B, TDS700D series) :

     -. Service Manual (서비스 매뉴얼; TDS500D, TDS600B, TDS700D series & TDS714L) :

     -. Technical Reference (TDS500D, TDS600B, TDS700D series & TDS714L) :

     -. Reference (TDS500D TDS600B TDS700D series) :

   사진 (Picture)  :

기기명 (Instrument) :  Analog Oscilloscope (파형측정기; 오실로스코프)

제작회사 (Manufacturer) :  EZ (LG)

형식 (Model) :  OS-5100

세부내용 (Description) : 

Features :

 -. 6″large size high luminance CRT
 -. Wider than specified frequency response
 -. Signal delay with delay line useful for observation of signal start point
 -. ALT. Triggering function (Vert Mode)
 -. Auto focusing according to the change of intensity
 -. Drift compensation circuit employed in vertical amplifier for low drift
 -. Jitterless and high trigger sensitivity
 -. TV sync. separation and hold-off circuit useful in video signal observation

The OS-5100 is very well designed with frequency Bandwidth from 40MHz to 100MHz to satisfy both higher quality and performance and lower cost requirements in the field of school, industry, service shop and experimental support of hobbyists.

The OS-5100 features a 6-inch rectangular CRT with internal graticule 8 x 10 div(1div=1cm) and TV signal synchronization function, etc. Featuring a delayed sweep enables improved observation of any desired portions of the signal displayed with the main time base.

Sepcification :

 -. Manufacturer : LG Precision
 -. Condition : Used
 -. Channels : 2
 -. Frequency : 100 MHz

첨부 (Attach)

   파일내용 (The content of file) : 

     -. Operation Manual (사용자 설명서) :

   사진 (Picture)  :

기기명 (Instrument) :  디지털 스토리지 오실로스코프 (Digital Storage Oscilloscope)

제작회사 (Manufacturer) :  Tektronix (텍트로닉스)

형식 (Model) :  TBS1000 series

세부내용 (Description) : 

TBS1000 시리즈 디지털 오실로스코프는 엔지니어와 교육자가 안정적으로 신호를 볼 수 있도록 해줍니다. 각 모델은 최대 2GS/s의 디지털 실시간 샘플링, 익숙하고 사용하기 쉬운 컨트롤, 상황에 맞는 내장된 도움말 시스템 및 표준 5년 보증을 지원합니다. 2개의 채널을 포함하는지 또는 4개의 채널을 포함하는지, 연구 개발 또는 교육에 사용할지 여부에 관계없이 사용자의 요구 사항과 적용 분야에 가장 적합한 버전을 선택하면 됩니다.

TBS1000B의 주요 특징
 -. 넓은 시야각을 가진 7인치 WVGA 디스플레이
 -. 34가지 자동 측정 기능
 -. FFT 분석, 파형 연산, 커서, 듀얼 주파수 계수기 등 지원
 -. 한계 테스트 및 데이터 로깅

TBS1000B-EDU의 주요 내용
 -. 코스웨어 연계 시스템을 통해 강사가 TBS1000-EDU에 정보를 로드하여 실험실에서 학생들이 작업할 수 있음(기본 제공)
 -. TekSmart Lab™ 네트워크 소프트웨어 와 호환되므로 강사가 한 대의 PC에서 많은 장비를 설치하고 모니터링하는 데 도움이 됨
 -. 상황에 맞는 도움말 시스템이 내장되어 언제 어디서나 필요한 도움말을 볼 수 있음

TBS1000의 주요 특징
 -. 아날로그 채널 4개
 -. 16가지 자동 측정 기능
 -. 5.7인치 컬러 디스플레이

첨부 (Attach)

   파일내용 (The content of file) : 

     -. Datasheet (데이터시트; TBS1000 series) :

    -. Datasheet (데이터시트; TBS1000B series) :

    -. Datasheet (데이터시트; TBS1000B- EDU series) :

    -. User Manual (사용설명서; TBS1000 series) :

    -. User Manual (사용설명서; TBS1000B & TBS1000B-EDU series) :

    -. Service Manual (서비스 매뉴얼; TBS1000B & TBS1000B-EDU series) :

    -. Thechnical Reference (TBS1000B & TBS1000B-EDU series) :

    -. Compliance and Safety Instruction (TBS1000B series) :

    -. Installation and Safety Manual (TBS1000 series) :

   사진 (Picture)  :